21
2023
-
12
Gas self-closing valve, can you use it?
Author:
The gas self-closing valve is installed on the indoor gas pipeline of residents. It is generally installed behind the gas meter and in front of the gas appliance. When the gas supply pressure of the gas pipeline is under-pressure or over-pressure, it will automatically close without electricity or other external power. Cut off the gas source, which can effectively prevent gas leakage and issuance accidents.
The gas self-closing valve mainly has the following four functions:
Under-voltage protection function: automatically shut down when gas stop, abnormal gas supply, etc. occur, and keep it closed all the time to prevent gas leakage when gas supply is restored.
Over-current protection function: effectively prevent a large number of sudden gas leakage, such as hose falling off, hose was accidentally burned or bitten off by rats, etc.
Overpressure protection function: when the pressure exceeds the safety line, it will automatically close, which can effectively prevent the gas supply pressure from being too high and causing accidents such as pipe explosion and damage to the gas stove.
Leakage detection function: keep the self-closing valve in normal ventilation state, open the manual switch of the self-closing valve, close the main gas valve, and observe for 5 minutes. If the red lifting button is sucked back, it indicates that the indoor gas pipeline system has leakage.
How to correctly use the gas self-closing valve?
Under normal ventilation condition, if the self-closing valve is closed, the gas can be used only by pulling the outer ring.
Some users will manually close the self-closing valve after using the gas. This is not right. Frequent opening and closing can easily cause the self-closing valve to fail and cause air leakage. When the gas needs to be turned off, close the front valve.
Close the front valve under normal gas consumption. At this time, the self-closing valve will automatically close and the flame will go out. Open the front valve again. If the stove cannot be ignited, it indicates that the self-closing valve is closed well. If the stove can still be ignited, it indicates that there may be a problem with the self-closing valve.
Latest News
2023-12-21
Application field of shut-off valve
In the petroleum industry, the shut-off valve is often used in oil field pipeline, oil and gas well switch and control, and oil and gas separation system in the filtration, water level control and so on. At the same time, the use of shut-off valves can not only improve safety, but also help improve production efficiency and save energy.
2023-12-21
Seven areas where regulators can be applied
The voltage regulator is the fourteenth batch of energy-saving products in the electromechanical industry. Used in voltage regulation, temperature control, speed control, dimming, power control and other places, the use of a wide range. This article Leilang Shanghai regulator manufacturers to analyze the field of regulator application.
2023-12-21
What are the application areas of solenoid valve
The machine tool industry is one of the main application areas of solenoid valve, due to the increasing degree of automation of machine tools, making the demand for solenoid valve is also growing. For example: clamping device, oil injection device, cutting equipment, pneumatic drive, hydraulic drive, etc. all need solenoid valve to control the flow of fluid.
2023-12-21
How to open the self-closing valve after stopping gas
After the self-closing valve is closed, do these steps to open it if it is safe:
2023-12-21
Gas self-closing valve, can you use it?
The gas self-closing valve is installed on the indoor gas pipeline of residents. It is generally installed behind the gas meter and in front of the gas appliance. When the gas supply pressure of the gas pipeline is under-pressure or over-pressure, it will automatically close without electricity or other external power. Cut off the gas source, which can effectively prevent gas leakage and issuance accidents.














